Table of Contents
Advertisement
You can purchase DIMMs from various vendors. Be sure the
DIMM you purchase meets the following requirements:
168-pin, SDRAM type
Capacity of 32, 64, 128 or 256 MB
Access speed of 15 ns or less
Dimensions within 134 mm (5.27 inches) 26 mm (1.02 inches),
with a thickness of 10 mm (0.4 inch)
Installing a memory module
1. Turn off the printer.
w
Warning:
To avoid electrical shock, do not attempt to install a DIMM
unless the printer is turned off.
2. Unplug the power cable from the electrical outlet.
3. Pull out the paper cassette, if necessary.
4. Turn the printer so its left side faces you.
5. Open the printer cover by pressing the latch on the right side
of the printer.
3-13
Options
3
Advertisement
Table of Contents
