Locating A Sceneona Tape For Playback; Searching Quickly For A Desired Scene - Zero Set Memory; Searching For A Scene By Date Of Recording - Date Search - Sony HANDYCAM DCR-TRV380 Operation Manual

Locating a sceneona
tape for playback
............................ _ REW
PLAY
........................... STOP
-----------------DISPLAY
---------------------- ZERO SET MEMORY
I During playhack, press ZERO SET
MEMORY on the Remote
Commander at the point you want to
locate later on.
The tape counter is reset to "0:00:00 ' and
÷0÷ appears on the screen.
The playback slarls fron_ file point
designated "I):O0:(t0" oll the lape counler.
To cancelthe operation
Press ZERO SET MEMORY on Ihe Remote
Commander again.
O Notes
• There may be a discrepancy of several seconds
between the time code and the tape counter.
• Zero set memo17 will not function correctly if there
is a blank section betx_een recorded sections on the
tape.
• For DCR-TRV480:
The zero set memory function does not work with
tapes recorded on other devices in the Hi8 _,1_/
standard 8 mm [_ system.
You can locate the point where the recording
date changes.
II the tape counter is not displayed,
press
DISPLAY on the Remote Commander.
Press [_ (stop) when you want to
stop playhack.
Press _ REW.
The tape slops automatically when tl_e tape
counter reaches "O:(t0:(t0."
4 Press PLAY.
I Slide the POWER switch repeatedly to
select the PLAY/EDIT mode.
Press SEARCH M. on the Remote
Commander repeatedly to select
[DATE SEARCH].
60 Playback