Searching The Boundaries Of Recorded; Tape By Title - Sony DCR-PC110 Operating Instructions Manual

Searching the boundaries of recorded
tape by title - Title search
If you nse a tape with cassette men-lory, yon can search fbr the boundaries of
recorded tape by title (Title search). Use the Remote Commander fbr this
operation.
(1) Set the POWER switch to VCR.
(2) Set CM SEARCH in _ to ON in the menu settings (p. 84). Tile default setting
is ON.
(3) Press SEARCH MODE on the Remote Commander repeatedly, until the TITLE
SEARCH indicator appears.
The indicator changes as follows:
TITLE SEARCH ---+DATE SEARCH ---+PHOTO SEARCH ---+PHOTO SCAN
(4) Press _ or _ on the Remote Commander to select the title for playback.
Your camcorder automatically starts playback of the scene having the title that
you selected.
g
©
MENU
To stop searching
Press m.
If you use a tape without cassette memory
You cannot superimpose or search a title.
In the _ mark
• The bar in the _ mark indicates the present point on the tape.
• The _ mark in the _ indicates the actual point you are twing to search.
If a tape has a blank portion between recorded portions
The title search ffmction may not work correctly.
To superimpose a title
See page 77.
51