Changing The Position Of A Sticker - Brother Entrepreneur Pro PR-1000 Operation Manual

w
Press .
→ Following screen appears when you proceed to the
embroidering screen without pressing
Press to finish connecting the patterns.
• To return to the embroidery settings screen, press
.
x
Press , then press
press the start/stop button to embroider the
third pattern.
Note
• If the machine is stopped and
embroidering or after embroidering has begun, the
reference edge and reference point for connecting
the next pattern can be set.
→ After embroidering is finished,
The three patterns have been connected.
Press to clear the pattern.

Changing the Position of a Sticker

.
While using the camera to connect patterns, a sticker
can be repositioned if the fabric cannot be re-hooped
so that the next pattern and the centers of the large
circles of the two stickers are within the embroidering
area.
As an example, we will use the embroidery frame with
a size of 10 cm × 10 cm (4 inches × 4 inches) to
connect patterns as shown below.
a
and then
b
a
Select the first pattern for practicing [1], and
then press
is pressed while
disappears.
b
Hoop fabric in the embroidery frame with a
size of 10 cm × 10 cm (4 inches × 4 inches),
and then attach the frame to the embroidery
machine.
c
Press
Pattern1.pes
Pattern2.pes
.
.
21