b
Press
in the pattern editing screen.
c
Rotate the pattern, and then press
d
Press
to display the embroidery
settings screen.
e
Press
.
f
Select the reference edge and reference point
for connecting this pattern to the next one.
Press
.
.
a
Reference edge and reference point of first pattern
Note
• Be sure to rotate the pattern from the pattern editing
screen. The reference edge and reference point are
specified along the smallest rectangle (not angled)
that contains all patterns selected when the
embroidery settings screen is displayed.
Rectangles and angled patterns
a
Rectangle
Refer to "Connecting Patterns to be Joined Along an
Edge", to joining the first and second patterns along
an edge.
Rectangles and patterns (not angled)
a
Rectangle
• Pressing
changes the angle at which patterns are connected.
in the embroidery settings screen
a
27