Sliding The Position Of The Pattern To Be Connected - Brother Entrepreneur Pro PR-1000 Operation Manual

h
When the pattern connection setting screen
(screen for connecting the selected pattern to
the previous one) appears, select the
reference edge and reference point, and then
press .
a
First pattern
b
Second pattern
i
Continue with step
(Connecting Three Patterns)" to finish
connecting patterns.
b
a
n
of "Practice
Sliding the Position of the Pattern to
be Connected
When using the pattern connecting function, patterns
can be connected by sliding them, instead of only
aligning patterns along reference edges and reference
points. This can be done when you want the pattern to
be equally spaced when embroidered. The vertical and
horizontal shifts can be set up to ±99.9 mm.
Note
• The arrangement of patterns displayed in the screen
may differ slightly from the actual embroidery.
Use a ruler to measure the vertical and horizontal
shifts before changing the settings.
a
First pattern
b
Second pattern
a
b
31