d
Refer to steps
(Connecting Three Patterns)" to embroider
the first pattern and re-hoop the fabric.
e
Select the next pattern, and then continue to
the embroidery settings screen.
f
When the pattern connection setting screen
(screen for connecting the selected pattern to
the previous one) appears, select the
reference edge and reference point
corresponding to those for the first pattern.
a
Reference edge and reference point
34
e
k
through
of "Practice
g
Specify the distance that the pattern is to be
slid, and then press
a
h
Continue with step
(Connecting Three Patterns)" to finish
connecting the patterns.
Note
• After checking that the trial embroidery results are
satisfactory, sew the actual embroidery. If you
decide to change the distance that the pattern is slid
after checking the trial embroidery, change the
settings selected in step
.
n
of "Practice
g
.