Download  Print this page

Displaying The Fabric While Aligning The Embroidery Position - Brother Entrepreneur Pro PR-1000 Operation Manual

Kit 1 instruction manual.
Hide thumbs

Advertisement

DISPLAYING THE FABRIC WHILE ALIGNING THE
EMBROIDERY POSITION
The fabric hooped in the embroidery frame can be
displayed on the LCD so that the embroidery position
can be aligned.
This feature can be used from the pattern editing screen
and embroidering settings screen.
Note
• When installing the following optional frame, the
built-in camera cannot be used to align the
embroidering position:
Cylinder frame, 80 mm (H) × 90 mm (W) (3 inches
(H) × 3-1/2 inches (W))
Wide cap frame, 60 mm (H) × 360 mm (W) (2-3/8
inches (H) × 14 inches (W))
Advanced cap frame 2, 60 mm (H) × 130 mm (W)
(2-3/8 inches (H) × 5-1/8 inches (W))
Advanced cap frame, 50 mm (H) × 130 mm (W) (2
inches (H) × 5-1/8 inches (W)).
• For details on using fabric thicker than 2 mm, refer
to "Positioning the pattern on thick fabric" (page 5).
a
Hoop the fabric in the embroidery frame, and
then attach the frame to the embroidery
machine.
b
Select the pattern, and then press
Note
• Check page 7/7 of Settings screen to make sure the
"Fabric Thickness Sensor" is set to "OFF" when
using light to medium weight fabrics.
c
Press
d
When the following message appears, press
.
.
→ The embroidery frame moves so the fabric can be
scanned.
.
3

Advertisement

Table of Contents

   Related Manuals for Brother Entrepreneur Pro PR-1000

This manual is also suitable for:

Entrepreneur pro pr1000eEntrepreneur pro pr1000e

Comments to this Manuals

Symbols: 0
Latest comments: