Brother Entrepreneur Pro PR-1000 Operation Manual page 18

Kit 1 instruction manual
Hide thumbs Also See for Entrepreneur Pro PR-1000:
Table of Contents

Advertisement

Note
• If the next pattern and the centers of the large circles
of the two positioning stickers do not fit within the
embroidering area, use a larger embroidery frame. If
a larger embroidery frame cannot be used, continue
m
to step
, and then refer to "Changing the Position
of a Sticker" on page 21 to reposition the sticker.
• If the sticker peels off during this procedure, the
patterns cannot be connected. In that case, restart
the procedure from the beginning.
l
Select the second pattern for practicing [2],
then press
, and then press
m
When the pattern connection setting screen
(screen for connecting the selected pattern to
the previous one) appears, select the
reference edge and reference point where
you want to connect to the first pattern, and
then press
will connect the center point of the left edge
for the second pattern with the center point
of the right edge for the first pattern. Select
the center point of the left edge, and then
press
.
a
Reference edge and reference point
b
Second pattern
c
First pattern
Note
• In this screen, the reference edge and reference
point of the first pattern can be changed. For details,
refer to "Changing the Reference Edge and
Reference Point for Connecting the Next Pattern
after a Pattern has been Embroidered" on page 28.
• If the positioning stickers do not fit within the
embroidering area, refer to "Changing the Position
of a Sticker" on page 21 to reposition the sticker.
• Using
second pattern can be changed. For details, refer to
"Sliding the Position of the Pattern to be Connected"
on page 31.
. Since, in this example, we
.
and
in this screen, the position of the
c
a
b
17

Advertisement

Table of Contents
loading

This manual is also suitable for:

Entrepreneur pro pr1000e

Table of Contents