Select the second pattern for practicing ,
and then press
When the pattern connection setting screen
(screen for connecting the selected pattern to
the previous one) appears, press
• To return to the embroidery settings screen, press
Without changing the reference edge and
reference point settings, press
• To return to the previous screen, press
After the following message appears, select
the area containing one of the two affixed
stickers, and then press
• It is not necessary to select the area containing one
of the two stickers, when using the embroidery
frame with the size of 10 × 10 cm (4 inches × 4
inches) as exampled in this procedure.
→ The camera detects the two stickers.
• If an error message appears, refer to page 19 to
solve the problem.