Transporting The Printer; For Long Distances; For Short Distances - Epson AcuLaser C9100 Reference Manual

Transporting the Printer

For long distances

If you need to transport your printer for long distances, carefully
repack it using the original box and packing materials.
Follow the steps below to repack your printer.
1. Turn off the printer.
2. Unplug the power cord from the electrical outlet.
3. Remove all installed options. For information on removing
options, see the section under Installing Options.
4. Attach the protective materials to the printer, then repack the
printer in its original box.
After replacing or setting up your printer at the new location, you
need to check the color registration and adjust the color alignment
if necessary. For details, see "Checking color registration" on page
251.

For short distances

Always pay attention to the following handling precautions when
you need to move the printer for short distances.
If you are moving the printer on its own, two people should lift
and carry the printer.
Follow the steps below to move the printer for short distances.
247