In addition to space considerations, always heed the following precautions when finding a place to
locate the printer:
❏ Place the printer where you can easily unplug the power cord.
❏ Keep the entire computer and printer system away from potential sources of interference, such
as loudspeakers or the base units of cordless telephones.
❏ Avoid using an electrical outlet that is controlled by wall switches or automatic timers.
Accidental disruption of power can erase valuable information in your computer's and
printer's memory.
Caution:
c
❏ Leave adequate room around the printer to allow for sufficient ventilation.
❏ Avoid locations that are subject to direct sunlight, excessive heat, moisture, or dust.
❏ Avoid using outlets that other appliances are plugged into.
❏ Use a grounded outlet that matches the printer's power plug. Do not use an adapter plug.
❏ Only use an outlet that meets the power requirements for this printer.
For long distances
Repacking the printer
If you need to transport your printer for long distances, carefully repack it using the original box
and packing materials.
1. Turn off the printer and remove the following items:
❏ Power cord
❏ Interface cables
❏ Loaded paper
❏ Installed options
❏ Imaging cartridge
2. Attach the protective materials onto the printer, then repack the printer in its original box.
Caution:
c
When moving the printer, always keep it horizontal.
AcuLaser M4000 Series
Cleaning and Transporting the Printer
User's Guide
137