Locating The End Of The Last Scene; Locating Scenes By Recording Date - Canon VIXIA HV40 Instruction Manual

PDayback+®+®
Leeatiag the Ead af the Last Scene
After play+rig back a tape, use this
function to locate the end of the last
scene recorded in order to continue
recording from that point,
Stop the playback before using this
function,
FUNC.
( E:_25)
1 Press _o
2 Se+ect (AV) [+¢i END SEARCH] and
press (_)+
3 Setect (_) [EXECUTE] and press
+ 'END SEARCH" appears,
+ The camcorder rew+ndsffast forwards
the tape, plays back the last few
seconds of the recording and stops the
tape,
+ To cancel the search press _]+
Leeatiag Scenes by Reeerdiag Date
You can locate the change of the date/
time zone with the date search function,
Press [_ or _ on the wireless
controller.
+ Press more than once to search for
further date changes (up to 10 times),
+ To cancel the search press STO_ +
e Recordings shorter than 1 minute per date/
time zone cannot be Jocated with this function+
® Date search may not function if the date, time
or data code are not correctly displayed.
e If there are sections recorded in different
standards (HDV/DV) on the same tape, the date
search may not work correctly.
e End search cannot be used once you remove
the cassette+
e If there are blank sections between
recordings or sections recorded in different
standards (HDV/DV) on the same tape, the end
search may not work correctly.