Zooming - Canon VIXIA HV40 Instruction Manual

Hd camcorder
Hide thumbs Also See for VIXIA HV40:
Table of Contents

Advertisement

Recording oooo
Observe the following precautions
while the
card access display ( _ [_ ) appears on screen
and when the CARD access indicator
is on or
flashing. Failing to do so may result in
permanent
data loss.
- Do not open the memory card slot cover and
do not remove the memory card.
- Do not disconnect
the power source or turn off
the camcorder.
- Do not change the position of the I_/E:_
switch or the operating mode.
o If the subject is not suitable for autofocus,
@
turns yellow. Adjust the focus manually (12:[3 53).
o When the subject is too bright, "OVEREXR"
starts flashing.
In such case, use the optional
FS-43U II ND filter.
Zooming
10x Optical Zeem
Move the zoom Jever toward W to
zoom out (wideoangJe). Move it toward
T to zoom in (teJephoto)°
You can also change the zoom speed
([::_ 39). You can select one of three fixed
zoom speeds or a variable speed that
depends on how you operate the zoom
lever: Press gently for a slow zoom; press
harder for faster zooms.
o You can also use the T and W buttons on the
wireless controller
or the LCD panel. The zoom
speed with these buttons will be the same as
with the camcorder
(when one of the fixed zoom
speed levels is selected) or fixed at
[_
SPEED 3] (when [_
VARIABLE]
is
selected).
o When set to [_[_
VARIABLE],
the zoom
speed will be faster in the record pause mode.
o Keep at least I m (3.3 ft.) away from the
subjecL At wide-angle,
you can focus on a
subject as close as 1 cm (0.39 in.).
(L::[3 12)
: In addition to the 1Ox optical
zoom, the 20Ox digital zoom is also
available
(E:I3 39).
Zoom out
W
T
zoom in

Advertisement

Table of Contents
loading

Table of Contents