Viewingstill Images - Canon VIXIA HV40 Instruction Manual

_®_ Playback
ViewingStill images
(L_ 12)
1 Hotding the Jock button pressed
down, set the _ switch to
PLAY.
2 Move the o_i/_ switch to I_
(memory card),
o Observe the following precautions while the
card access dispJay _ _ appears on screen,
and when the CARD access indicator is on or
flashing. Failing to do so may result in
permanent data Joss.
- Do not open the memory card slot cover and
do not remove the memory card,
- Do not disconnect the power source ortum off
the camcorden
- Do not change the position of the _]/E_
switch or the operating mode,
o The following may not be displayed correctly.
- Images not recorded with this camcorder.
- Images edited on or uploaded from a
computer.
- Images whose fib names have been
changed,
Image Jump
You can jump ahead to a specific image
without having to browse all images one _,
o
by one.
To RUN THROUGH TH_ ST_LL IMAG_=S
:3 SeJect (@_) the stiJJ image,
You can use the joystick to move
through the still images even if the
joystick guide above does not appear
on the screen,
Push the joystick (,_) or (_) and hoJd
it pressed down,
Release the joystick when the running
number gets to the number of the image
you want to display,