Locating The End Of The Last Scene; Locating Scenes By Recording Date - Canon HV20 Instruction Manual

I
Playback ....- - - - - - - - - - - - -
Locating the End of the Last Scene
After playing back a tape, use this
function to locate the end of the last
scene recorded in order to continue
recording from that point.
II
p~y
I
Stop the playback before using this
function.
Locating Scenes
by
Recording Date
You can locate the change of the date/
time zone with the date search function.
II
PtM
Y
I
Press :......
.4]
or
[_I]
on the wireless
controller.
• Press more than once to search for
further date changes (up to 10 times),
• To cancel the search press
i~TOP
.' .
1
Press
:FUNfJ.
2
Select (.A.T)
[~I END SEARCH] and
press (8).
3
Select ( ...
~
) [EXECUTE] and press
(~V)·
• "END, SEARCH" appears,
• The camcorder rewinds/fast forwards
the tape, plays back the last few
seconds of the recording and stops the
tape,
• To cancel the search press
[Ii],
FUNC.
(CO
23)
FUNC.
• Recordings shorter than 1 minute per datel
time zone cannot be located with this function.
• Date search may not function if the date, time
or data code are not correctly displayed.
• If there are sections recorded in different
standards (HDV/DV) on the same tape, the date
search may not work correctly.
• End search cannot be used once you remove
the cassette .
• If there are blank sections between
recordings or sections recorded in different
standards (HDVIDV) on the same tape, the end
search may not work correctly,