Canon VIXIA HV40 Instruction Manual page 92

TrouMe? o_.,o
Memory Card Operation
Prob_ern
Memory card cannot be
inserted.
Cannot record on the memory
card.
Solution
Memory card was not facing the correct direction. Turn the
memory' card over and reinsert it.
Memory card is full. Erase still images to free some space or
replace the memory, card.
Memory' card was not initialized. Initialize the memory' card.
The folder and file numbers have reached their maximum value.
Set [FILE NOS.] to [RESET] and insert a new memory' card.
Set the camcorder to
22
69
7O
42
35
69
70
Memory card cannot be played
back.
Image cannot be erased. Image is protected. Cancel the protection.
"[3" flashes in red. Card error occurred. Turn off the camcorder. Remove and
reinsert the memory card. Initialize the memory card if flashing
)ersists.
Printing
Problem Solution L_
The printer is not operating Disconnect the USB cable and turn off the camcorder and the -
even though the camoorder printer. After a short whiIe, turn them on again, set the
and printer are correctly camcorder to mode and restore the connection.
connected.
_diting
Solution
Set [AV,_ DV] to [OFF].
Wrong signal standard. Refer also to the instruction manual of
the connected device.
Dubbing may work using the AV/O terminal.
Problem
Cannot record with this
camcorder video input from an
external video device
connected to the HDV/DV
terminal using a DV cable,
42
Others
Problem Solution E:_
A rattling can be heard from the The internal lens fixture can move when the camcorder is turned -
camcorder, off. This is not a malfunction.