Manual Focus Adjustment - Canon VIXIA HV40 Instruction Manual

_o Adjusting the Picture: Exposure, Focus and Color
Maaaal Fetus Adjastmeat
Autofocus may not work weft on the
following subjects. In such case, focus
manually.
Reflective surfaces
Subjects with low contrast or
without vertical lines
Fast moving subjects
Through wet windows
Night scenes
(E:_ 12)
Adjust the zoom before you start the
procedure.
Mode switch: P
1 Press o
"M F" appears.
2 Adjust the focus as necessary with
the FOCUS diaJ until the image
appears focused,
, You can also press _G_N_I (1::_ 53)
or use the CUSTOM key to magnify
the picture so you can focus more
easily (C:g:l 6 1).
, Pressing [_ again will return the
camcorder to autofocus.
The camcorder will automatically return to
autofocus when you set the mode switch to _,
Infinity Fecus
Use this function when you wish to focus
on faraway subjects such as mountains or
fireworks.
A FOCUS ;,, <1 ,_ ,, :: **
! _ I .... i[
j "
1 Adjust the zoom.
2 In autofocus mode, keep
pressed down for more than 2
seconds.
, co appears.
, Pressing _-0_ 1 again will return the
camcorder to autofocus.
, Operating the zoom or the FOCUS
dial will return the camcorder to
manual focus adjustment (MF).
Magnifying the |mage an the Screen
You can magnify the image at the center
of the screen to make it easier for you to
focus manually. You can also choose to
record the magnified image,
([:_ 12)
o
@