Canon VIXIA HV40 Instruction Manual page 89

coco Trouble?
TroubJesheeting
If you have a problem with your camcorder, refer to this checklist. Consult your dealer
or a Canon Service Center if the problem persists.
Power Source
Problem
* Camcorder wilt not turn on.
* The camcorder switches off
by itself.
* The cassette compartment
cover will not open.
* The LCD/viewfinder switches
on and off.
The CHARGE indicator flashes
rapidly (about twice per
second).
* Battery pack wilt not charge.
* The CHARGE indicator
flashes very' slowly (about
once every' 2 seconds).
_e¢ording/PJayback
ProbJem
Buttons witt not work.
$elution
Battery' pack is exhausted. Replace or charge the battery pack.
"_" flashes on the screen.
"_:f' flashes on the screen.
"_" flashes on the screen.
The lens cover is not
completely open.
%" flashes red on the screen.
"REMOVE THE CASSETTE"
appears on the screen.
The wireless controller wilt not
'work.
Attach the battery pack correctly.
2O
Charging has stopped because the compact power adapter or -
the battery pack is faulty.
Charge the battery pack in temperatures between O °C and
40 °C (32 °F and 104 °F).
Battery packs become hot with use and may not charge. When -
the battery pack is outside the charging temperature range, the
CHARGE indicator will flash irregularly. The charging witl start
once the battery pack temperature is below 40 °C (104 °F).
The battery pack is damaged. Use a different battery pack.
Solution
Turn on the camcorder.
Load a cassette.
Disconnect the power source and reconnect it after a short time.
If the probtem still persists, disconnect the power source and
_ress the RESET button with a pointed item. Pressing the
RESET button resets all settings.
Load a cassette.
Battery' pack is exhausted. Replace or charge the battery pack.
Condensation is detected. See reference page.
Turn the camcorder off and then on again.
22
Abnormal characters appear on
the screen. The camcorder
does not operate properly.
22
2O
99
The camcorder malfunctions. Consult a Canon Service Center. -
Remove the cassette and reinsert it. 22
Set [WLREMOTE] to [ON].
The battery of the wireless controller is exhausted. Replace the
battery'.
46
23
B"