Locating The End Of The Last Scene; Locating Scenes By Recording Date - Canon VIXIA HV30 Instruction Manual

• Recordings shorter than 1 minute per date/
time zone cannot be located with this function.
• Date search may not function if the date, time
or data code are not correctly displayed.
• If there are sections recorded in different
standards (HDV/DV)
o~
the same tape, the date
search may not work correctly.
H~I
Press
(I~]
or
I
~Il
on the wireless
controller.
• Press more than once to search for
further date changes (up to 10 times).
• To cancel the search press
[STOP
.J.
Locating Scenes
by
Recording Date
You can locate the change of the date/
time zone with the date search function.
··;100,
FUNC.
POINTS TO CHECK
1
Press
[FUNC.).
2
Select
(~.)
[..
I
END SEARCH] and
press (8).
3
Select (~~ ) [EXECUTE] and press
(8)·
• "END SEARCH" appears.
• The camcorder rewinds/fast forwards
the tape, plays back the last few
seconds of the recording and stops the
tape.
• To cancel the search press
~
.
FUNC.
(QJ
23)
Stop the playback before using this
function.
Locating the End of the Last Scene
After playing back a tape, use this
function to locate the end of the last
scene recorded in order to continue
recording from that point.
• End search cannot be used once you remove
the cassette .
• If there are blank sections between
recordings or sections recorded in different
standards
(HDV/DV)
on the same tape, the end
search may not work correctly.