Canon VIXIA HV40 Instruction Manual page 41

Hd camcorder
Hide thumbs Also See for VIXIA HV40:
Table of Contents

Advertisement

•o,o Menu Options
Lists
• During the piayback
ofarecording
made in[_ao
HDV(PF3O)],
[_24
HDV(PF24)]
or
[_24F HDV(24F)],
_ wiii a ppear
on the screen (not _ao,
_4
or
_24F ).
Playingback a w}descreen recording: TV
sets compatible with the Video ID°I
system will automatically
switch to wide
(16:9) mode. Otherwise,
change the
aspect ratio of the TV manually. To play
back on a TV with normal aspect ratio
(4:3) change the [TV TYPE] setting
accordingly
(C::l 43).
l DvREC mODE
E/ [
[_
STD PLAY], [{g_ LONG PLAY]
When [HD STANDARD]
is set to one of
the DV standards, you can change the
video quality and as a result, also the
recording time available on the tape.
• Recording in LP mode extends the
available recording time on the tape 1.5
times.
• Depending on the condition of the tape
(long usage, imperfections, etc.) you may
notice some video problems (blocky video
artifacts, banding, etc.) in the playback
picture when playing back recordings
made in LP mode. We recommend
using
the SP mode for important recordings.
• If you make recordings in both SP and
LP modes on the same tape, dunng
playback you may notice some video
problems in the picture at the point where
the recording mode changes.
• When playing back in this camcorder
tapes recorded in LP mode with other
devices or vice versa, you may notice
some problems in the playback picture or
the sound may stop briefly.
[gv AUglO
_} I
[_
16bit], [[_
12bit]
When [HD STANDARD]
is set to one of
the DV standards, you can change the
audio quality.
[_
16bit]: To record sound atthe
highest quality.
[_
12bit]: If you will dub audio oradd a
music track later with an external device.
WINgSCREEN
I
Mode switch: P
[Q
AUTO], [_
OFF_I¢]
The camcorder automatically
reduces the
background
sound of wind when
recording outdoors.
• The wind screen cannot be turned off
when the mode switch is set to _.
[ MmCATT
I (C::365)
[_
OFF], [_
2sec], [_
4sec],
[_
6sec], [IE_I_ 8sec], [_:_
1Osec]
Selects the time to display a still image
after it has been recorded.
• You can erase (C]:369) the still image
while you are reviewing it (or immediately
after recording it, if set to [_
OFF]).
<
o

Advertisement

Table of Contents
loading

Table of Contents