Canon VIXIA HV40 Instruction Manual page 91

Hd camcorder
Hide thumbs Also See for VIXIA HV40:
Table of Contents

Advertisement

coco TroubJe?
Playback
Solution
Video heads are dirty. Clean the video heads.
99
Problem
During
playback
there
is video
noise.
Pressing
the playback
button
does not start playback.
No sound from the builtdn
speaker.
Load a cassette.
Set the camcorder to
Tape reached the end C D._] END" appears on the screen).
Rewind the tape.
Open the LCD panel.
Speaker volume is turned off. Adjust the volume with the joystick
and joystick guide in
mode.
Video heads are dirty. Clean the video heads.
22
31
31
32
When playing back a tape
99
recorded in HDV standard the
playback is jerky or the sound
stutters on and off.
Image will not appear on the
Set [AV,_ DV] to [OFF].
TV screen.
Set [AV/PHONES] to [_
AV].
Check
again
that the camcorder
is properly
connected
to the TV.
When connecting the camcorder to an HDTV using the
CTC-1OO/S Component Cable, make sure to select the correct
specification for the [COMP.OUT] setting.
When connecting the camcorder to an HDTV using the
CTC-1OO/S Component Cable, make sure to connect also the
audio connections using the white and red plugs of the
STV-25ON Stereo Video Cable.
The video input on the TV is not set to the video terminat to
which you connected the camcorder. Select the correct video
input.
42
32
71
44
There is no sound from the TV.
71
Text displays do not appear on
If you connected the camcorder to the TV using the video
44
the TV.
component connection, set [DV OUTPUT] to [HDV/DV].
Tape is running, but image will
74
not appear on the TV screen.
Video heads
are dirty. Clean the video heads.
You attempted to play back or dub a copyright protected tape.
Stop playback/dubbing.
The camcorder
is connected
using the HDM] cable,
but there
is no picture
or sound
from the
HDTV.
Video input from the HDV/DV
terminal
cannot
be output through
the HDMI OUT
terminal.
This may happen when playing back a tape that contains mixed
recordings in different standards (HDV/DV). Disconnect the
HDMI cable and then restore the connection or turn the
camcorder off and then on again.
99
78
74
&
o
B"
S'

Advertisement

Table of Contents
loading

Table of Contents