Canon VIXIA HV40 Instruction Manual page 88

Connecting toaPrinter _*
FUNC,
( E:_25)
_U-FCT} =>I _ PRINT ORDER
G
Press(_iT])
_: The image selection s creen
appears,
F_OM THE_MAG_ $ _LECTION S CREEN
1 Select (<_) the still image you
want to mark with a print order.
2 Press (_) to set the print order.
The number of copies appears in
orange in the box next to the print
order symbol &.
3 Set (AV) the number of copies
desired and press (_).
To cancel the print order, set (_') the
number of copies to 0.
4 Repeat steps 1-3 to mark additional
images with print orders or press
[_NC]] twice to close the menu.
Printing the Still Images Marked with Print
Orders
A
FUNC,
( E_ 25) _u.c.
v
1 Connect the eamcorder to the
printer using the USB connection -
connection type E] (12_80)- shown
in the previous section PC
Connection Diagrams,
2 Press _, seJect (AV) the T_
icon and press (_) to open the
setup menus.
3 Select (AV) [_ _ PRINT] and press
, The print setting menu appears.
, The error message "SET _ PRINT
ORDER" appears if you connect a
printer with direct print function and
select [,_ _ PRINT] without having set
any print orders beforehand.
4 Make sure that [PRINT] is seJected
and press (_).
Printing starts. The print setting menu
disappears when the printing is
completed.
o Depending on the connected printer, you can
change some print settings before step 4
(_ 85).
o Cancel PtintinglPrinting Errcts ([:]_ 86)
e RestartingPtin_ing_ O pen the print settings
menu as explained in steps 2-3 above. In the
print sett!ngs menu, select [RESUME] and
press (<_). The remaining images
will
be
printed.
Printing cannot be restarted when the print
order settings have been changed or if you
deleted a still image with print order settings.
Erasing AH Priat Orders
[-F@a_.} < >I T_ MENU
I CARD OPERATIONS
I PRINT ORD.ALL ERASE
¢'I YES
([:_ 12)
J
J
J
J