Preparing The Camcorder; The Wireless Controller - Canon VIXIA HV40 Instruction Manual

•_o_ G etting Started
@ii! i! iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii iiiiiiiiiiiiiiiiiiiiiiiiii i)
o Make sure to initialize all memory cards
before using them with this camcorder for the
first time ([]Z] 70),
o Memory cards have front and back sides that
are not interchangeable, Inserting a memory
card facing the wrong direction can cause a
malfunction of the camcorder.
The Wireless Controller
inserting the Battery
(Lithium Itutten Battery CR2825)
Proper operation cannot be guaranteed for all
miniSD cards.
Preparingthe Cameorder
\
1 Turn on the camcordero
The lens cover wiii open automaicaly,
2 Adjust the viewfinder.
Keep the LCD panel closed to use the
viewfinder and adjust the dioptdc
adjustment lever as necessary,
3 Fasten the grip belt.
Adjust the grip belt so that you can
reach the zoom lever with your index
finger, and the STARTISTOP button
with your thumb=
Tab
1 Press the tab in the direction of the
arrow and pal out the battery
holder.
2 Place the ithium button battery with
the + side facing up.
3 Insert the battery holder, o
Using the Wiretess Centreler
s y/ , /2
Point the controller at the camcorder's
remote sensor when you press the
buttons.
The wireless controller may not work properly
when the remote sensor is situated under
strong light sources or direct sunlight.
If the wireless controller does not work, check
that [WLREMOTE] is not set to [OFF (/@]
(I_Ct 46). Othepwise, replace the battery.