Canon VIXIA HV40 Instruction Manual page 70

Still Image Options _o_
[_ON_:]_10_ PROTECT
6
Press ((@)
[ PROTECT]: The image selection
screen appears.
FKOM THE _MAG_ $1ELECTION SCReeN
1 SeJect 1<_) the still image you
want to protect,
2 Press ({_) to protect the still
image,
appears on the bottom bar and the
image cannot be erased. Press (_}_)
again to cancel the image protection.
3 Repeat steps t-2 to protect
additional images or press
twice to cJose the menu,
lnitializin_ the Memory Card
Initialize new memory cards when you use
them for the first time. You may also
choose to initialize a memory card to
erase all the files in contains. The regular
initialization option [INITIALIZE] will clear
the file allocation table but will not
physically erase the stored data. If you
need to completely erase all the data,
select instead the complete initialization
option [COMPL.INIT.].
o Initialize all memory cards before using them
with this camcorder,
(E:_ 12)
FUNC,
( _ 25)
FUN€.
[-F@_:} @I T_ MENU
8
I CARD OPERATIONS
6
INITIALIZE
6
I INFIALIZE
or
COMPL.INIT.
6
[:_J_: _I YES*
* Press (_E_) to cancel the complete
initialization while it is in progress. All the
image files will be erased and the memory
card can be used without any problem.
o Initializing the memory card will erase all still
images, even the protected ones, The original
still images cannot be recovered.
o When you feel the time it takes to record on or
read from the memory card has become too
long, we recommend you select the complete
initialization.
o The complete initialization may take a few
minutes, depending on the capacity of the
memory card,