Locating The End Of The Last Scene; Magnifying The Playback Image - Canon ZR-800 Instruction Manual

Playback •••--.- - - - - - - - - - - - - - - - - - - - - - - - - - -
Locating the End of the Last Scene
After playing back a tape, use this
function to locate the end of the last
scene recorded in order to continue
recording from that point.
_ 4t':;g~· ~p'O'-mlmN---T----Smm-T---O'~--CuH~E'~C--K~---m~----'--u~----u-m~--u'--'m---'~···'l
W~}.:v.::::i).ffij
j
•..., ••
~
••_ w Yo · Yo _ _
J
Magnifying the Playback Image
During playback, movies and still images
can be magnified up to 5 times. You can
also select the area to be magnified.
(OJ
9)
1
Move the zoom lever toward T.
• The image is magnified by 2 times
and a frame appears indicating the
position of the magnified area.
• To further enlarge the image, move
the zoom lever toward T. To reduce the
magnification, move the zoom lever
toward W.
•
~
will appear for images that cannot
be enlarged.
2
Select
(~T, <lIIIIIII~)
the enlarged area
of the picture with the joystick.
To cancel the magnification, move the
zoom lever toward W until the frame
disappears.
A
..
<lIlIII . . . . .
~~
...
•
FUNC.
• End search cannot be used once you remove
the cassette.
• If there are blank sections between
recordings, the end search may not work
correctly.
Stop the playback before using this
function.
FUNC.
(CD
19)
1
Press
[FUNC.).
2
Select
(~T)
[..
I
END SEARCH] and
press (@).
3
Select
(<lIIIIIII~)
[EXECUTE] and press
(@).
• "END SEARCH" appears.
• The camcorder rewinds/fast forwards
the tape, plays back the last few
seconds of the recording and stops the
tape.
• To cancel the search push the
joystick (T ) towards
II.
. . . . . . . . . . . . . . . . . . . . . . . . . . ' , ' . ' : ' " " " , ' : ' : ' : ' : ' : ' /
Ili1itrlll~1
While the magnification position frame is
displayed, it will replace the joystick guide. Cancel
the magnification to return to normal playback.