Canon VIXIA HV40 Instruction Manual page 60

Still Image Recording Options ***_
In the [_ FIREWORKS] recording program the
focus priority is automatically set to [_ OFF].
Continuous Sheeting and Expesure
Bracketing
Take a sedes of pictures of a moving
subject or record the same picture in 3
levels of exposure in order to choose later
the picture you like the best.
(1:_ 12)
Mode switch: P (except for the
[QFIREWORKS] recording program).
Opti@nS _ Default value
Records a single still image.
Captures a series of still images as long as
you hold _ pressed down. For the
number of frames per second, refer to the
notes below.
The camcorder records a still image in
three different exposures (dark, normal,
light in 1/2 EV steps), allowing you to
choose the shot you like the best.
FUNC,
( [_ 25)
[_0_ O DrivelC°n Of M odethe currently selected
¢_[ Desired option
CONTINUOUS SHOOTING/
HIGHoSPE_D CONTINUOUSSHOOTING
1 Press _ halfway to activate
the autofocus.
2 Press _ fu??y and hold it
pressed down.
A series of still images will be
recorded as long as you hold the
button pressed down.
AUTO _XPGSUR_ BP, A CKETING
Press _6TO/, first haJfway to activate
the autofocus and then fu??y to record
the stir image.
Three still images in different exposures
will be recorded on the memory card.
o The speed and maximum number of
continuous shots is as follows.
- [_ CONT.SHOOT.]: Approx. 3 images/
second
- [ _j HISPEED CONT.SHOOT.]: Approx. 5
images/second
- Continuous Shooting with flash: Approx. 2.!
images/second
- Maximum number of shots: 60 still images
o These figures are approximate and vary with
the recording conditions and subjects.
o The actual number of images per second will
be lower when "4_," (camcorder shake
warning) is displayed on the screen.