EEPROM
User program
(8 k steps)
and System info
Data register
(0 to 2048 words,
user setting)
Other data
c
Executed when power is turned on (it is called initial load) or EEPROM Read
command is issued from the programming tool. The EEPROM Read is possible
only in the HALT mode.
d
Executed when EEPROM Write command is issued from the programming tool.
It is possible in either HALT or RUN mode. (See Note)
5. Operating System Overview
User program
and System info
c
d
Data register
(D0000 to Dnnnn,
user setting)
The rest of Data
register and
other registers
Basic Hardware and Function
RAM
(8 k steps)
Other data
6F3B0253
67