Toshiba PROSEC T1-16S User Manual page 216

7. Instructions
FUN 146 STOT
Expression
Input [ STOT A ]
Function
When the input is ON, the device A is set to ON and the devices of STIN instructions on the same
rung are reset to OFF.
Execution condition
Input
OFF No execution
ON Execution
Operand
Name
X
A Step device
Example
See example on STIN (FUN 145) instruction.
Note
The STIZ, STIN and STOT instructions are used together to configure the step sequence.
Two or more STOT instructions can be placed on one rung to perform simultaneous sequences.
Two or more STIN instructions can be placed on one rung in parallel or in series to perform loop
or convergence of sequences. (Max. 11 STIN instructions on one rung)
To perform the conditional branch (sequence selection), separate the rungs as follows.
This limitation is applied to T1 version 1.00 only.
[ STIN A ] | |
| |
Not allowed
214
T1-16S User's Manual
Step sequence output
Operation
Device
Y R S T. C. XW YW RW SW T
[ STOT B ]
[ STOT C ]
Output
-
-
Register
C D I
[ STIN A ] | |
[ STIN A ] | |
Available
6F3B0253
Constant Index
J K
[ STOT B ]
[ STOT C ]