General Specifications - Toshiba PROSEC T1-16S User Manual

2. Specifications

2.1 General specifications

Power supply voltage
Power consumption
Inrush current
Output
rating
(Note)
Power supply voltage
Power consumption
Inrush current
5Vdc output rating (Note)
Retentive power interruption
Insulation resistance
Withstand voltage
Ambient temperature
Ambient humidity
Noise immunity
Vibration immunity
Shock immunity
Approximate weight
NOTE
(1) 24Vdc service power output is not provided on the DC power supply type.
(2) The maximum output current of the 5Vdc is 1.5A. However there is the following
restrictions, depending on the conditions.
When HP911 is used:
When RS-485 port is used:
When 24Vdc service power is used:
38
T1-16S User's Manual
Item
100 to 240Vac (+10/-15%), 50/60 Hz
45VA or less
50A or less (at 240Vac, cold start)
24Vdc 0.2A (for external devices and/or for input signals)
(24Vdc, ±10%)
5Vdc 1.5A (for I/O module)
24Vdc (+20/-15%)
18W or less
25A or less (at 24Vdc)
1.5A (for I/O module)
10ms or less
10M
(between power terminals and ground terminal)
1500Vac - 1 minute
0 to 55 C (operation), -20 to 75 C (storage)
5 to 95%RH, no condensation
1000Vp-p/1 s, Conform to EMC Directive 89/336/EEC
9.8m/s
(for 30 minutes per axis, on 3 mutually perpendicular axes)
98m/s
(3 shocks per axis, on 3 mutually perpendicular axes)
500g
Redused by 0.2A
Reduced by 0.1A
Refer to the right chart.
T1-16S
or more
2
(1g)
2
(10g)
6F3B0253
(A)
1.5
1.0
0.1 0.2 (A)
24Vdc service power