Lexmark T652 Service Manual page 112

4062
Error
code or
message
28x.48
x = bin
number
28x.49
x = bin
number
28x.50
x = bin
number
2-78
Service Manual
Error contents
Deflector gate
transition to output
option not detected
Applies to:
StapleSmart finisher
Deflector gate
transition to standard
bin not detected
Applies to:
StapleSmart finisher
Left tamper home
position jam
Applies to:
StapleSmart finisher
Description/Action
The sensor (deflector gate HP)
does not detect transition of the
deflector gate to the output
option.
The sensor (deflector gate HP)
does not detect transition of the
deflector gate to the standard
bin.
The left tamper home position
is not detected by the sensor
(left tamper HP)
Possible repair actions
1. Check all the connections on
the output option controller
card.
2. Check the sensor (deflector
HP) for damage and replace if
needed.
Go to "SFP stapler assembly
sensor (deflector HP)
removal" on page 4-190.
3. Replace the output option if
problem remains.
1. Check all the connections on
the output option controller
card.
2. Check the sensor (deflector
HP) for damage and replace if
needed.
Go to "SFP stapler assembly
sensor (deflector HP)
removal" on page 4-190.
3. Replace the output option if
problem remains.
1. Check all the connections on
the output option controller
card.
2. Check the tamper drive belt
for damage and replace if
needed.
3. Replace the left tamper
motor assembly.
Go to "SFP stapler assembly
tamper drive motor
assembly removal" on
page 4-180.
4. Replace the sensor (tamper
HP).
Go to "SFP stapler assembly
sensor (tamper HP left and
right) removal" on
page 4-187.
4. Replace the output option if
problem remains.