Lexmark T652 Service Manual page 101

Error
code or Error contents
message
250.07 Sensor (input) late
jam
Source = MPF
250.08 Sensor (input) late
jam
Source = MPF
250.09 Sensor (input) late
jam
Source = MPF
250.10 Sensor (input) late
jam
Source = MPF
250.11 Sensor (input) late
jam
Source = MPF
260.00 Envelope feeder area
jam
260.01 Envelope feeder
assembly error
Description/Action
The media is late reaching the
sensor (input) within the
specified time.
The media is late reaching the
sensor (input) within the
specified time.
The media is late reaching the
sensor (input) within the
specified time.
The media is late reaching the
sensor (input) within the
specified time.
The media is late reaching the
sensor (input) within the
specified time.
The media is jammed in the
envelope feeder area.
Mechanical feed error or timing
error.
Possible repair actions
Go to sensor (input) late jam
service check.
See "Sensor (input) late jam
service check." on
page 2-129.
Go to sensor (input) late jam
service check.
See "Sensor (input) late jam
service check." on
page 2-129.
Go to sensor (input) late jam
service check.
See "Sensor (input) late jam
service check." on
page 2-129.
Go to sensor (input) late jam
service check.
See "Sensor (input) late jam
service check." on
page 2-129.
Go to sensor (input) late jam
service check.
See "Sensor (input) late jam
service check." on
page 2-129.
1. Remove the envelope
feeder.
2. Remove all media present
in media path.
3. Check media for proper
installation.
4. Check for obstructions in
media path.
5. Go to sensor (input) service
check. See "Sensor
(input) service check" on
page 2-126.
1. Remove the envelope
feeder.
2. Remove all media present
in media path.
3. Check media for proper
installation.
4. Check for obstructions in
media path.
5. Ensure the envelope feeder
assembly is properly
installed.
6. Check all connections on
the envelope feeder
assembly.
7. Replace the envelope
feeder assembly if problem
remains.
Diagnostic information
4062
2-67