Lexmark T652 Service Manual page 142
Service manual
Hide thumbs
Also See for T652:
- Service manual (596 pages) ,
- User manual (313 pages) ,
- Compatibility manual (179 pages)
Table of Contents
Advertisement
4062
Error
code or
message
933.00
934.00
935.00
936.10
936.11
2-108
Service Manual
Error contents
Polygon mirror motor
locked. No first laser
H sync received.
Mirror motor lost lock.
Polygon mirror motor
control failure.
Main drive motor
assembly failure
No halls detected at
motor start.
Motor = type 0
Main drive motor
assembly failure
No halls detected at
motor start.
Motor = type 1
Description/Action
The hsync signal is missing or
not at the correct voltage.
The signals driving the polygon
motor may have been
corrupted, or the cable may be
loose, or the motor may be
bad.
The signals driving the polygon
mirror motor may have been
corrupted, or the cable may be
loose, or the motor may be
bad.
The main drive motor assembly
may be faulty or has failed.
The main drive motor assembly
may be faulty or has failed.
Possible repair actions
Replace the printhead
assembly. Go to
"Printhead
assembly removal (T650)" on
page 4-60
or
"Printhead
assembly removal (T652,
T654)" on page
4-61.
1. Check all connections on
the printhead assembly.
2. Check all connections on
the system card assembly.
3. Replace the printhead
assembly. Go to
"Printhead assembly
removal (T650)" on
page 4-60
or
"Printhead
assembly removal (T652,
T654)" on page
4-61.
1. Check all connections on
the printhead assembly.
2. Check all connections on
the system card assembly.
3. Replace the printhead
assembly. Go to
"Printhead assembly
removal (T650)" on
page 4-60
or
"Printhead
assembly removal (T652,
T654)" on page
4-61.
1. Check all connections on
the system card assembly.
2. Check all connections on
the main drive motor
assembly.
3. Replace the main drive
motor assembly. Go to
"Output cover assembly
removal (T650, T652,
T654)" on page
4-54.
4. Replace the system card
assembly if problem
remains. Go to
"System
card assembly removal
(T650, T652, T654, T656)"
on page
4-76.
1. Check all connections on
the system card assembly.
2. Check all connections on
the main drive motor
assembly.
3. Replace the main drive
motor assembly. Go to
"Output cover assembly
removal (T650, T652,
T654)" on page
4-54.
4. Replace the system card
assembly if problem
remains. Go to
"System
card assembly removal
(T650, T652, T654, T656)"
on page
4-76.
Advertisement
Table of Contents
