Lexmark T652 Service Manual page 53

Error
code or Error contents
message
201.01 Main drive motor
assembly load error.
Type 1 fuser
201.02 Sensor (fuser output)
late jam.
Type 1 fuser
201.03 Image data did not
start in time
Type 1 fuser
201.04 Sensor (narrow
media) late jam
Type 1 fuser
201.06 Sensor (narrow
media) late jam
Type 1 fuser
201.07 Sensor (fuser output)
late jam
Type 1 fuser
201.25 Sensor (fuser output)
area jam.
Type 2 fuser
Description/Action
The main drive motor assembly
has failed or caused high
mechanical load due to paper
jam or bind.
The media is late reaching the
sensor (fuser output) within the
specified time.
Printhead write failure
The expected wide media is
late reaching the sensor
(narrow media) within the
specified time.
The expected wide media is
late reaching the sensor
(narrow media) within the
specified time.
The media is late reaching the
sensor (fuser output) within the
specified time.
The media is jammed in the
sensor (fuser output) area.
Possible repair actions
1. Check all connections on
the main drive motor
assembly.
2. Check all connections on
the system card assembly.
3. Replace the main drive
motor assembly if problem
remains. Go to "Output
cover assembly removal
(T650, T652, T654)" on
page 4-54.
Go to sensor (fuser output) late
jam service check.
See "Sensor (fuser output)
late jam service check." on
page 2-135.
If problem remains, a type 2
fuser can be installed.
1. Check all connections on the
printhead assembly
2. Check all connections on the
system card assembly.
3. Replace the printhead
assembly if problem remains.
4. Replace the system card
assembly if problem remains.
Go to "System card
assembly removal (T650,
T652, T654, T656)" on
page 4-76.
Go to sensor (narrow media)
late jam service check.
See "Sensor (narrow media)
late jam service check." on
page 2-139.
Go to sensor (narrow media)
late jam service check.
See "Sensor (narrow media)
late jam service check." on
page 2-139.
Go to sensor (fuser output) late
jam service check.
See "Sensor (fuser output)
late jam service check." on
page 2-135.
Go to sensor (fuser output)
service check.
See "Sensor (fuser output)
late jam service check." on
page 2-135.
Diagnostic information
4062
2-19