High Capacity Input Tray (Hcit) Drawer Slide Assembly Removal - Lexmark T652 Service Manual

4062-XXX
1. Remove the HCIT cover, left. Go to
Note: The left side anti-tip assembly will come off when removing the HCIT cover, left.

High capacity input tray (HCIT) drawer slide assembly removal

The left and right drawer slide assemblies are the same, and only one is in a package. The instructions below
are for removing the left slide; removing the right slide has similar instructions.
1. Remove the HCIT media tray assembly. Go to
removal" on page
2. Remove the three screws (A) securing the HCIT drawer slide to the frame of the drawer.
4-124
Service Manual
"High capacity input tray (HCIT) cover, left removal" on page
"High capacity input tray (HCIT) media tray assembly
4-115.
4-122.
A