Lexmark T652 Service Manual page 100

4062
Error
code or
message
245.68
245.69
250.00
250.03
250.06
2-66
Service Manual
Error contents
Pick motor stop error
Source = Media tray 5
Pick motor control
failure.
Source = Media tray 5
MPF area jam
Source = MPF
Sensor (input) late
jam
Source = MPF
Sensor (input) late
jam
Source = MPF
Description/Action
Pick motor stop error detected
by options tray x
The pick motor does not reach
the proper operating speed at
the specified time.
The media is jammed in the
MPF area.
The media is late reaching the
sensor (input) within the
specified time.
The media is late reaching the
sensor (input) within the
specified time.
Possible repair actions
1. Remove all media present
in media path.
2. Ensure media tray is not
overfilled.
3. Check all connections on
the pick arm assembly.
4. Check all connections on
the system card assembly.
5. Replace the pick arm
assembly if problem
remains. Go to "Operator
panel door assembly
removal (models X651,
X652, X654, and X656)"
on page 4-49.
6. Replace system card
assembly if problem
remains. Go to "System
card assembly removal
(T650, T652, T654, T656)"
on page 4-76.
1. Remove all media present
in media path.
2. Ensure media tray is not
overfilled.
3. Check all connections on
the pick arm assembly.
4. Check all connections on
the system card assembly.
5. Replace the pick arm
assembly if problem
remains. Go to "Operator
panel door assembly
removal (models X651,
X652, X654, and X656)"
on page 4-49.
6. Replace system card
assembly if problem
remains. Go to "System
card assembly removal
(T650, T652, T654, T656)"
on page 4-76.
Go to sensor (input) service
check.
See "Sensor (input) service
check" on page 2-126.
Go to sensor (input) late jam
service check.
See "Sensor (input) late jam
service check." on
page 2-129.
Go to sensor (input) late jam
service check.
"Sensor (input) late jam
See
service check." on
page 2-129.