Specifying Systems For Installation - Symantec Veritas Cluster Server Installation Manual

62 Installing and configuring VCS
Installing and configuring VCS 5.0 RU3

Specifying systems for installation

Note: The system from where you install VCS must run the same Linux distribution
as the target systems.
To install VCS using the product installer
1 Confirm that you are logged in as the superuser and mounted the product
disc.
2
Start the installer.
# ./installer
The installer starts the product installation program with a copyright message
and specifies the directory where the logs are created.
3
From the opening Selection Menu, choose:
4 From the displayed list of products to install, choose: Veritas Cluster Server.
To install VCS using the installvcs program
1
Confirm that you are logged in as the superuser and mounted the product
disc.
2 Navigate to the folder that contains the installvcs program.
# cd /cluster_server
3 Start the installvcs program.
# ./installvcs [-rsh]
The installer begins with a copyright message and specifies the directory
where the logs are created.
The installer prompts for the system names on which you want to install and then
performs an initial system check.
for "Install/Upgrade a Product."
I