Obtaining Vcs License Keys - Symantec Veritas Cluster Server Installation Manual

Obtaining VCS license keys

Preinstallation tasks (continued)
Table 3-2
Task
Review basic
instructions to optimize
LLT media speeds.
Review guidelines to help
you set the LLT
interconnects.
Mount the product disc
Verify the systems
before installation
This product includes a License Key certificate. The certificate specifies the product
keys and the number of product licenses purchased. A single key lets you install
the product on the number and type of systems for which you purchased the
license. A key may enable the operation of more products than are specified on
the certificate. However, you are legally limited to the number of product licenses
purchased. The product installation procedure describes how to activate the key.
To register and receive a software license key, go to the Symantec Licensing Portal
at the following location:
https://licensing.symantec.com
Make sure you have your Software Product License document. You need
information in this document to retrieve and manage license keys for your
Symantec product. After you receive the license key, you can install the product.
Click the Help link at this site to access the License Portal User Guide and FAQ.
The VRTSvlic package enables product licensing. After the VRTSvlic is installed,
the following commands and their manual pages are available on the system:
vxlicinst Installs a license key for a Symantec product
vxlicrep Displays currently installed licenses
vxlictest Retrieves the features and their descriptions that are encoded in a
license key
Reference
See "Optimizing LLT media speed settings on private NICs"
on page 48.
See "Guidelines for setting the media speed of the LLT
interconnects" on page 48.
See "Mounting the product disc"
See "Performing automated pre-installation check"
Preparing to install VCS
Performing preinstallation tasks
on page 49.
on page 49.
39