About the VCS installation program
Optional features of the installvcs program
VRTSvcsmn — Manual pages for VCS commands
You can access the installvcs program from the command line or through the
Veritas product installer.
The VCS installation program is interactive and manages the following tasks:
Licensing VCS
Installing VCS RPMs on multiple cluster systems
Configuring VCS, by creating several detailed configuration files on each
system
Starting VCS processes
You can choose to configure different optional features, such as the following:
SNMP and SMTP notification
The Symantec Product Authentication Services feature
The wide area Global Cluster feature
Review the highlights of the information for which installvcs program prompts
you as you proceed to configure.
See
"About preparing to install VCS"
The uninstallvcs program, a companion to installvcs program, uninstalls VCS
RPMs.
See
"About the uninstallvcs program"
Table 4-1
specifies the optional actions that the installvcs program can perform.
installvcs optional features
Table 4-1
Optional action
Check the systems to verify that they meet
the requirements to install VCS.
Install VCS RPMs without configuring VCS.
Configure or reconfigure VCS when VCS
RPMs are already installed.
Installing and configuring VCS
About the VCS installation program
on page 29.
on page 153.
Reference
See
"Performing automated pre-installation
check"
on page 49.
See
"Installing VCS using installonly option"
on page 59.
See
"Configuring VCS using configure
option"
on page 59.
55
Need help?
Do you have a question about the Veritas Cluster Server and is the answer not in the manual?