Verifying The Cluster Nodes - Symantec Veritas Cluster Server Installation Manual

118 Verifying the VCS installation
Verifying LLT, GAB, and cluster operation

Verifying the cluster nodes

To verify the cluster
1 To verify the status of the cluster, type the following command:
hastatus -summary
The output resembles:
-- SYSTEM STATE
-- System
A galaxy
A nebula
-- GROUP STATE
-- Group
B ClusterService
B ClusterService
2
Review the command output for the following information:
The system state
If the value of the system state is RUNNING, the cluster is successfully
started.
The ClusterService group state
In the sample output, the group state lists the ClusterService group, which
is ONLINE on galaxy and OFFLINE on nebula.
Verify the information of the cluster systems using the
The information for each node in the output should be similar.
Refer to the
hasys(1M)
Refer to the Veritas Cluster Server User's Guide for information about the system
attributes for VCS.
To verify the cluster nodes
On one of the nodes, type the
hasys -display
State
RUNNING
RUNNING
System
galaxy
nebula
manual page.
hasys -display
Frozen
0
0
Probed AutoDisabled
Y N
Y N
command.
hasys -display
command:
State
ONLINE
OFFLINE