84
Installing and configuring VCS
Verifying and updating licenses on the system
Verifying the cluster after installation
Verifying and updating licenses on the system
Checking licensing information on the system
When you have used installvcs program and chosen to configure and start VCS,
VCS and all components are properly configured and can start correctly. You must
verify that your cluster operates properly after the installation.
See
"About verifying the VCS installation"
After you install VCS, you can verify the licensing information using the vxlicrep
program. You can replace the demo licenses with a permanent license.
You can use the vxlicrep program to display information about the licenses on a
system.
To check licensing information
1
Navigate to the folder containing the
# cd /opt/VRTS/bin
# ./vxlicrep
2
Review the following output to determine the following information:
The license key
The type of license
The product for which it applies
Its expiration date, if any. Demo keys have expiration dates. Permanent
keys and site keys do not have expiration dates.
License Key
Product Name
Serial Number
License Type
OEM ID
Features :=
Platform
Version
Tier
on page 105.
program and enter:
vxlicrep
= xxx-xxx-xxx-xxx-xxx
= Veritas Cluster Server
= 1249
= PERMANENT
= 478
= Linux for IBM Power
= 5.0
= 0