60
Installing and configuring VCS
Installing and configuring VCS 5.0 RU3
Installing and configuring VCS 5.0 RU3
Overview of tasks
cluster configuration. The installvcs program prompts for cluster information,
and creates VCS configuration files without performing installation.
See
"Configuring the basic cluster"
The
option can be used to reconfigure a VCS cluster. VCS must not
-configure
be running on systems when this reconfiguration is performed.
If you manually edited the main.cf file, you need to reformat the main.cf file.
The example installation demonstrates how to install VCS on two systems: galaxy
and nebula. The example installation chooses to install all VCS RPMs and
configures all optional features. For this example, the cluster s name is vcs_cluster2
and the cluster s ID is 7.
Figure 4-1
illustrates the systems on which you would install and run VCS.
An example of a VCS installation on a two-node cluster
Figure 4-1
Node: galaxy
eth1
eth2
eth0
Cluster name: vcs_cluster2
Cluster id: 7
Table 4-3
lists the installation and the configuration tasks.
on page 67.
VCS private network
Public network
Node: nebula
eth1
eth2
eth0