Updating Product Licenses Using Vxlicinst - Symantec Veritas Cluster Server Installation Manual

Updating product licenses using vxlicinst

Reserved
Mode
You can use the
vxlicinst
you have VCS already installed and configured and you use a demo license, you
can replace the demo license.
See "Replacing a VCS demo license with a permanent license"
To update product licenses
On each node, enter the license key using the command:
# cd /opt/VRTS/bin
# ./vxlicinst -k XXXX-XXXX-XXXX-XXXX-XXXX-XXX
Replacing a VCS demo license with a permanent license
When a VCS demonstration key license expires, you can replace it with a
permanent license using the
To replace a demo key
1 Make sure you have permissions to log in as root on each of the nodes in the
cluster.
2 Shut down VCS on all nodes in the cluster:
# hastop -all -force
This command does not shut down any running applications.
3 Enter the permanent license key using the following command on each node:
# cd /opt/VRTS/bin
# ./vxlicinst -k XXXX-XXXX-XXXX-XXXX-XXXX-XXX
Verifying and updating licenses on the system
= 0
= VCS
command to add the VCS license key on each node. If
program.
vxlicinst(1)
Installing and configuring VCS
on page 85.
85