Screen Status Read Command; Cr_Screen Command; Cr_ Kystnmode Command; Cr_Vscale Command - Sanyo PLC-WXU300 - 2500 Lumens Manual

PLC-WXU300 Expand Serial Command Functional Specifications

9.8 Screen Status Read Command

9.8.1

CR_SCREEN Command

Command "CR_SCREEN"[CR]
Details Get selected on-screen image size
Acceptable
%a
Response
Unacceptable
9.8.2

CR_ KYSTNMODE Command

Command "CR_KYSTNMODE"[CR]
Details Get setting status of Keystone Store Mode
Acceptable
Response %a
Unacceptable
9.8.3

CR_VSCALE Command

Command "CR_VSCALE"[CR]
Details Get setting status of Vertical Scale Store Mode
Acceptable
Response %1
Unacceptable
9.8.4

CR_VPOS Command

Command "CR_VPOS"[CR]
Details Get setting status of Vertical Position Store Mode
Acceptable
Response %1
Unacceptable
"000_%a"[CR]
"NORMAL" --------------- Normal mode is selected
"TRUE" -------------------- True mode is selected
Input
"FULL" --------------------- Full mode is selected
is
"CUSTOM" ---------------- Custom mode is selected
PC
When the screen is set to D.Zoom, projector returns the previous
status (NORMAL )
"NORMAL" ---------------------- Normal mode is selected
"ZOOM" -------------------------- Zoom mode is selected
Input
"NATURAL" --------------------- Natural wide is selected
is
"WIDE" ---------------------------Wide mode is selected
Video
"FULL" --------------------------- Full mode is selected
"CUSTOM" ---------------------- Custom size is selected
"Error Code"[CR] ------ When the command is invalid due to
"?"[CR] ----------------------- When unclear command is received
"000_%a"[CR]
"STR" ---------------------- Store mode is "Store"
"RST" ---------------------- Store mode is "Reset"
"Error code"[CR]
"000_%1[CR]
"-32" ~ "032"
"Error code"[CR]
"000_%1"[CR]
"-15" ~ "015"
"Error code"[CR]
57/72
condition such as Input source