Table of Contents
Advertisement
I
NSTALLING OPTIONS
The following options are available to extend the performance of your printer:
>
256, 512MB RAM DIMM: to extend the main memory of your printer and speed up
the processing of large files
>
SD Card: to enable collating of printed pages and can be used to store overlays and
macros, fonts, and secure or proof documents waiting to be printed
>
Second/third paper tray: to increase your printer's paper handling capacity by 530
sheets (80g/m²) per tray
I
NSTALLATION PROCEDURE
To install any of the above options, follow the detailed installation sheet that accompanies
the option.
S
ETTING THE DRIVER DEVICE OPTIONS
Once your new upgrade has been installed, you may need to update the printer driver so
that the additional features are available to your applications.
Accessories such as additional paper trays will only be usable if the printer driver on your
computer knows they are there.
In some cases the hardware configuration of your machine is automatically detected when
the driver is installed. However, it is advisable to at least check whether all of the available
hardware features are listed in the driver.
This procedure is essential if you subsequently add extra hardware features to your
machine after the drivers have been installed and set up.
Remember that if your printer is shared between users on different computers, the driver
must be adjusted on each user's machine.
W
INDOWS
1.
Access the driver's Properties window.
(a)
Open the Printers window (called "Printers and Faxes" in Windows XP) via the
Start Menu or from the Windows Control Panel.
(b)
Right-click the icon for this machine, and choose Properties from the pop-up
menu.
2.
Select the Device Options tab.
In the Windows XP PostScript driver the tab may be called Device Settings.
3.
Set the options for any devices you have just installed.
4.
Click OK to close the window and save your changes.
M
OS X
AC
Snow Leopard (Mac OS X 10.6) and Leopard (Mac OS X 10.5)
1.
Open the Mac OS X Print & Fax Preferences.
2.
Ensure your machine is selected.
3.
Select Options & Supplies.
4.
Select Driver.
5.
Select all hardware options appropriate to your machine and click OK.
Installing options > 74
Advertisement
Table of Contents
