Choosing When To Display The Image - Epson PowerLite 7850p User Manual

Using the Projector's Menus
134

Choosing When to Display the Image

After your image is saved, you can set it up as the startup screen, or the
screen you see when there's no signal or when you press the
button (see page 38).
1. Press the button to display the menu screen (if not already
Menu
displayed).
2. To display your image as the startup screen, highlight the
menu, then press
Advanced1
highlight , then press
ON
To display your image on the No-Signal or A/V Mute screen,
continue with the following steps.
3. Highlight the
Setting
4. Select the screen(s) on which you want your image to appear:
Highlight
■
No-Signal Msg.
(instead of a blank screen) when there is no video signal
incoming from the currently selected source.
Highlight
■ A/V Mute
you press the
A/V Mute
5. Select , then press
Logo
to be displayed. (Or select
screen instead.)
6. When you're finished, press
. Select
Enter Startup Screen
.
Enter
menu, then press
Enter
if you want to display your image
if you want your image to appear when
button.
. This sets your image as the screen
Enter
if you prefer to display a blue
Blue
to exit.
E
SC
A/V Mute
,
.