Controlling Your Presentation; Editing Your Scenario On The Projector - Epson PowerLite 7850p User Manual

note
Even if your scenario is set to
change slides automatically,
you can still change slides
manually as described here.
Presenting from a Memory Card or Digital Camera
116
5. When you're done with your presentation, use the
highlight in the upper right corner of the screen, and then
EJECT
press on the remote control. When you see a message
Enter
asking you to insert a LAN card or memory card, it's safe to
remove your memory card (see page 114 for details).

Controlling Your Presentation

While your presentation is running, use the remote control as follows:
■ Press or
Enter Page down
to begin playing a movie.
■ Press to display the previous slide or image, or to replay
Page up
a movie.
Press different sides of the
■
the screen.
To exit the scenario at any point, press the
■
button to confirm that you want to exit.
Enter

Editing Your Scenario on the Projector

You can modify your scenario using EasyMP on the projector. This
lets you make last-minute changes, such as changing the order of your
slides or hiding individual slides. These changes are not permanently
saved with the scenario, but remain in effect only as long as you don't
remove the card or turn off the projector. Follow these steps:
1. Highlight the
to display the next slide or image, or
button to rotate a slide or image on
scenario you want to edit, then press
button to
button. Press the
ESC
.
Enter