Adjusting The Image Quality; Adjusting Images From Video Sources - Epson PowerLite 7850p User Manual

note
The setting
Brightness
changes the opacity of the
projector's LCD panels. You
can also change the lamp's
brightness. Select
in the
Brightness Control
Advanced 2 menu, then
choose or (the
High Low
default setting is ).
High
Using the Projector's Menus
126

Adjusting the Image Quality

You can use the Video menu to adjust the brightness, sharpness, color,
tint, and contrast. If you're projecting from a computer (but not
through the port), there are additional adjustments you can make
DVI
(see page 127).

Adjusting Images from Video Sources

1. Press the button on the remote control, then select the
Menu
menu.
Video
You see the Video menu screen. (The actual settings may vary,
depending on the selected input source. The Video menu below is
for a composite video or S-video source.)
Video Video
Audio Audio
Effect Effect
Setting Setting
User's Logo User's Logo
Advanced1 Advanced1
Advanced2 Advanced2
About About
Reset All Reset All
[ [ ]: Select ]: Select [ [
2. Use the pointer button to highlight the desired option, then
adjust it as needed:
■
Position
If the image is slightly cut off on one or more sides, it may not
be centered exactly. Use this setting to center it (not available
for RGB video images).
■
Brightness
Lightens or darkens the overall image.
■
Contrast
Adjusts the difference between light and dark areas.
Position Position
Adjust Adjust
0 0
Brightness Brightness : -
Contrast Contrast : 0 0
-
Color Color : 0 0
-
: 0 0
Tint Tint -
: 0 0
Sharpness Sharpness -
Color Mode Color Mode Select [Dynamic Select [Dynamic
Select Select [Auto [Auto
Video Signal Video Signal
Reset Reset
Execute Execute
]: Enter ]: Enter
+
+
+
+
+
] ]
] ]
[Menu]: Exit [Menu]: Exit