Customizing Projector Features; Image Setup Options - Epson PowerLite 7850p User Manual

Customizing Projector Features

You can use the menu system to change the video signal input at
certain ports, turn sleep mode on or off, adjust the network settings,
change the language, and customize several other features.

Image Setup Options

Use these settings to change how the projector processes incoming
video signals. Several of these settings should normally be left at the
factory default setting (except for the
settings).
■
Computer Input
Select the setting for the type of equipment you've connected to
the port:
Computer
: For a computer connection
Analog-RGB
: For a video player that outputs an RGB video signal
RGB-Video
■ (in the Setting menu)
BNC Input
Select the setting for the type of equipment you've connected to
the BNC ports:
: For a computer connection
Analog-RGB
: For a video player that outputs an RGB video signal
RGB-Video
: For a video player that outputs an NTSC component
YCbCr
video signal
: For a video player that outputs an HDTV component
YPbPr
video signal
■ (in the Video menu)
Video Signal
Leave this setting at
system (select
PAL60
displaying an image through the
Computer
(in the Setting menu)
unless you are using a 60-hertz PAL
Auto
). You can change this setting only if you're
or
Video
and
BNC Input
port.
S-Video
Using the Projector's Menus
137