note:
If you don't need the other
network ports, disable them
by deselecting their check
boxes. If more than one
network port is enabled, the
projector software warns you
to turn off AirPort when you
first connect the projector.
Disregard this message.
Presenting Through a Wireless Network
76
2. Make sure Location is set to
Select
Automatic
Network Port
Select
Configurations
AirPort
then select
3. Select
Network Port Configurations
menu.
4. Under Port Configurations, select
5. Click
Apply Now
6. Click the AirPort icon on the menu bar at the top of the
Macintosh desktop. You see the AirPort status menu:
7. Check to make sure AirPort is turned on.
8. Select your projector's ESSID.
.
Automatic
in the Show pull-down
AirPort
. Then close the window.
.